基本信息
姓名：龚文平
出生年份：1989年03月
联系地址：湖北省武汉市鲁磨路388号 工程楼213室
邮箱：wenpinggong@cug.edu.cn

学习工作经历
2017.07-当前 中国地质大学（武汉） 特任教授
2015.01-2017.07 Clemson University Research Assistant Professor
2012.08-2014.12 Clemson University 土木工程专业 工学博士
2011.09-2012.07 同济大学 隧道与地下工程专业 博士学习
2007.09-2011.07 同济大学 土木工程专业 工学学士

研究兴趣
工程地质与岩土工程问题不确定性评价与鲁棒性优化设计
滑坡等工程地质灾害风险辨识与工程地质灾害预测控制技术
土动力学地震液化评估与岩土地震工程

主要学术荣誉
2015.03 国际学术期刊《Journal of GeoEngineering》优秀论文奖
2014.05 国际学术会议GeoShanghai 2014 International Conference最佳论文奖
2016.05 国际学术会议6th Asian-Pacific Symposium on Structural Reliability and its Applications最佳论文奖Wilson H. Tang Best Paper Award 

提名
2015.12 国际学术期刊《ASCE Journal of Geotechnical and Geoenvironmental Engineering》最佳论文奖Thomas A. Middlebrooks Award 提名
2015.06 国际学术期刊《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》最佳论文奖 提名

主持或参与科研项目
2018.01-2020.12 国家自然科学基金青年项目：考虑地质模型不确定性的渐进式滑坡变形演化机理研究 (No. 41702294) 主持

学术委员会兼职
中国地震学会岩土工程防震减灾专业委员会-青年工作委员会 副主任委员
美国土木工程师学会American Society of Civil Engineers (ASCE) Associate Member
美国岩土工程风险评估和管理委员会ASCE/G-I Risk Assessment and Management Committee Member
中国土木工程学会工程风险与保险分会-青年工作委员会 委员

国际学术期刊编委
《Engineering Geology》
《Bulletin of Engineering Geology and the Environment》
《Marine Georesources & Geotechnology》
《International Journal of Geotechnical Engineering

国际学术专著
《Reliability of Geotechnical Structures in ISO2394》参与编写

期刊论文
第一作者论文
1) Gong, W., Juang, C. H., and Martin, J. R. (2017). A new framework for probabilistic analysis of the performance of a supported excavation in clay considering spatial variability. Géotechnique, 67(6), 546-552.
2) Gong, W., Tien, Y. M., Juang, C. H.*, Martin, J. R., and Zhang, J. (2016). “Calibration of empirical models considering model fidelity and model robustness—Focusing on predictions of liquefaction-induced settlements.” Engineering Geology, 203, 168-177.
3) Gong, W., Juang, C. H.*, Khoshnevisan, S., and Phoon, K. K. (2016). “R-LRFD: Load and resistance factor design considering robustness.” Computers and Geotechnics, 74, 74-87.
4) Gong, W., Juang, C. H.*, Martin, J. R., and Ching, J. (2016). “New sampling method and procedures for estimating failure probability.” Journal of Engineering Mechanics, ASCE，142(4), 04015107.
5) Gong, W., Tien, Y. M., Juang, C. H.*, Martin, J. R., and Luo, Z. (2016). “Optimization of site investigation program for improved statistical characterization of geotechnical property based on random field theory.” Bulletin of Engineering Geology and the Environment.
6) Gong, W., Huang, H., Juang, C. H.*, and Wang, L. (2016) “Simplified robust geotechnical design of soldier pile-anchor tieback shoring system for deep excavation.” Marine Georesources & Geotechnology.
7) Gong, W., Juang, C. H.*, and Martin II, J. R. (2016). “Numerical integration method for computing reliability index of a geotechnical system.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 10(2), 109-120.
8) Gong, W., Huang, H., Juang, C. H.*, Atamturktur, S., and Brownlow, A. (2015). “Improved shield tunnel design methodology incorporating design robustness.” Canadian Geotechnical Journal, 52(10), 1575-1591.
9) Gong, W., Juang, C. H.*, Huang, H., Zhang, J., and Luo, Z. (2015). “Improved analytical model for circumferential behavior of jointed shield tunnels considering the longitudinal differential settlement.” Tunnelling and Underground Space Technology, 45, 153-165.
10) Gong, W., Wang, L., Khoshnevisan, S., Juang, C. H.*, Huang, H., and Zhang, J. (2015). “Robust geotechnical design of earth slopes using fuzzy sets.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE 141(1), 04014084.
11) Gong, W., Khoshnevisan, S., and Juang, C. H.* (2014). “Gradient-based design robustness measure for robust geotechnical design.” Canadian Geotechnical Journal, 51(11), 1331-1342.
12) Gong, W., Luo, Z., Juang, C. H.*, Huang, H., Zhang, J., and Wang, L. (2014). “Optimization of site exploration program for improved prediction of tunneling-induced ground settlement in clays.” Computers and Geotechnics, 56, 69-79.
13) Gong, W., Wang, L., Juang, C. H.*, Zhang, J., and Huang, H. (2014). “Robust geotechnical design of shield-driven tunnels.” Computers and Geotechnics, 56, 191-201. 

通讯作者论文
14) Juang, C. H., Gong, W.*, and Martin, J. R. (2017). “Subdomain sampling methods – Efficient algorithm for estimating failure probability.” Structural Safety, 66, 62-73.
15) Xiao, J., Gong, W.*, Martin II, J. R., Shen, M., & Luo, Z. (2016). Probabilistic seismic stability analysis of slope at a given site in a specified exposure time. Engineering Geology, 212, 53-62.
16) Khoshnevisan, S., Juang, C. H., Zhou, Y., and Gong, W.* (2015). “Probabilistic assessment of liquefaction-induced lateral spreads using CPT - Focusing on the 2010-2011 Canterbury earthquakes.” Engineering Geology, 192, 113-128.
17) Huang, H., Gong, W., Khoshnevisan, S., Juang, C. H.*, Zhang, D., and Wang, L. (2015). “Simplified procedure for finite element analysis of the longitudinal performance of shield tunnels considering spatial soil variability in longitudinal direction.” Computers and Geotechnics, 64, 132-145.
18) Khoshnevisan, S., Gong, W.*, Juang, C. H., and Atamturktur, S. (2015). “Efficient robust geotechnical design of drilled shafts in clay using a spreadsheet.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 141(2), 04014092.

非第一作者或通讯作者论文
19) Lu, S., Tang, H., Zhang, Y., Gong, W., and Wang, L. (2017). “Effects of the particle-size distribution on the micro and macro behavior of soils: fractal dimension as an indicator of the spatial variability of a slip zone in a landslide.” Bulletin of Engineering Geology and the Environment, 1-13.
20) Xiao, J. H., Luo, Z.*, Martin, J. R., Gong, W., and Wang, L. (2016) “Probabilistic geotechnical analysis of energy piles in granular soils.” Engineering Geology, 209, 119-127.
21) Sert, S., Luo, Z.*, Xiao, J., Gong, W., and Juang, C. H. (2016), “Probabilistic analysis of responses of cantilever wall-supported excavations in sands considering vertical spatial variability.” Computers and Geotechnics, 75, 182-191.
22) Shen, M., Chen, Q.*, Zhang, J., Gong, W., and Juang, C. H. (2016). “Predicting liquefaction probability based on shear wave velocity: An update.” Bulletin of Engineering Geology and the Environment.
23) Peng, X., Li, D. Q.*, Cao, Z. J., Gong, W., and Juang, C. H. (2016). “Reliability-based robust geotechnical design using Monte Carlo simulation.” Bulletin of Engineering Geology and the Environment.
24) Luo, Z.*, Wang, L., Gong, W., and Juang, C. H. (2015). “Probabilistic approaches for ultimate resistance of drilled shafts in sands considering spatial variability.” Geotechnical Engineering Journal, Southeast Asian Geotechnical Society, 46(2), 102-110.
25) Khoshnevisan, S., Gong, W., Wang, L., and Juang, C. H.* (2014). “Robust design in geotechnical engineering – An update.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 8(4), 217-234.
26) Wang, L., Juang, C. H.*, Atamturktur, S., Gong, W., Khoshnevisan, S., and Hsieh, H. S. (2014). “Optimization of design of supported excavations in multi-layer strata.” Journal of GeoEngineering, 9(1), 1-12.
27) 黄宏伟, 龚文平, 庄长贤, 张洁. (2014). 重力式挡土墙鲁棒性设计. 同济大学学报(自然科学版), 42(3), 377-385.

学术会议论文
大学特邀报告
28) Juang, C. H., Zhang, J., Khoshnevisan, S., and Gong, W. (2017). “Probabilistic methods for assessing soil liquefaction potential and effect.” GeoRisk 2017, Denver, USA .
29) Juang, C. H., Gong, W., Khoshnevisan, S., and Wang, L. (2016). “Some considerations and examples for robust geotechnical design.” 6th Asian-Pacific Symposium on Structural Reliability and its Applications (APSSRA 2016), Shanghai, China.
30) Juang, C. H., Zhang, J., and Gong, W. (2015). “Reliability-based assessment of stability of slopes.” In IOP Conference Series: Earth and Environmental Science and International Symposium on Geohazards and Geomechanics 2015 (ISGG 2015) (Vol. 26, No. 1, p. 012006). IOP Publishing. Coventry, England.

第一作者论文
31) Gong, W., Juang, C. H., Martin, J. R., Liu, W., and Khoshnevisan, S. “Total failure probability of a slope at a given site in a seismic-prone zone in a specified exposure time.” Geotechnical Frontiers 2017 (pp. 472-481).
32) Gong, W., Juang, C.H., Martin, J. R., and Wang, L. Site Characterization in Geotechnical Engineering - Does A Random Field Model Always Outperform A Random Variable Model?” GeoRisk 2017.
33) Gong, W., Juang, C. H., Martin, II, J. R., and Huang, W. (2016). “Numerical integration method for estimating failure probability.” 6th Asian-Pacific Symposium on Structural Reliability and its Applications (APSSRA 2016).
34) Gong, W., Juang, C. H., and Martin, II, J. R., (2016). “New approach for evaluating serviceability failure probability of earth-retaining system for deep excavation in spatially random field” Geotechnical and Structural Engineering Congress 2016. (Abstract Paper)
35) Gong, W., Khoshnevisan, S., Huang, H., Juang, C. H., and Zhang, J. (2015). “R-LRFD: robust load and resistance factor design.” IFCEE2015, ? ASCE 2015 (pp: 299-308).
36) Gong, W., Juang, C. H., Martin, II, J. R., and Zhang, J. (2015). “An efficient method to compute the failure probability.” 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12).
37) Gong, W., Luo, Z., Wang, L., Huang, H., and Juang, C. H. (2014). “Optimization of site exploration effort to improve the accuracy of tunneling-induced ground settlement prediction in soft clays.” Geo-Congress 2014 Technical Papers, GSP 234 ? ASCE 2014 (pp: 505-514). 

非第一作者论文
38) Wang, L., Powers, M., and Gong, W. (2017). “Reliability analysis of geosynthetic reinforced soil walls.” GeoRisk 2017.
39) Luo, Z., Martin, J. R., Wang, L., Gong, W., and Juang, C. H. (2016). “Bayesian updating of a spatially varied soil property for enhancing reliability in drilled shaft design.” In Geo-Chicago 2016 (pp. 631-640).
40) Huang, H., Gong, W., Zhang, D., Zhang, J., and Juang, C. H. (2015). “Robust design of shield tunnels” XVI European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE 2015), Geotechnical Engineering for Infrastructure and Development - Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering, 2(7), 279-284.  
41) Luo, Z., Sert, S., Gong, W., and Juang, C. H. (2015). “Finite element analysis of supported excavations considering spatial variability.” GeoEquebe 2015, Canada.
42) Wang, L., Gong, W., Luo, Z., and Juang, C. H. (2015). “Reliability-based robust geotechnical design of rock bolts for slope stabilization.” IFCEE 2015 ? ASCE 2015 (pp: 1926-1935).
43) Huang, H., Gong, W., Khoshnevisan, S., and Juang, C. H. (2014). “Robust geotechnical design of shield-driven tunnels using fuzzy sets.” Tunneling and Underground Construction, GSP 242 ? ASCE 2014 (pp: 184-194).
44) Wang, L., Luo, Z., Gong, W., Khoshnevisan, S., and Juang, C. H. (2014). “Moment methods for assessing the probability of serviceability failure in braced excavations.” Geo-Congress 2014 Technical Papers, GSP 234 ? ASCE 2014 (pp: 3293-3302).
45) Khoshnevisan, S., Wang, L., Gong, W., and Juang, C. H. (2015). “Robust design optimization applied to braced excavations.” IFCEE 2015, ? ASCE 2015 (pp: 1380-1388).

国家发明专利
1) 一种地层抗力作用特性模拟试验部件 专利号2011103014341
2) 一种盾构隧道纵向结构模型试验装置 专利号2011103014322

国际学术期刊审稿
《IEEE Transactions on Reliability》
《Engineering Geology》
《ASCE Journal of Geotechnical and Geoenvironmental Engineering》
《Computers and Geotechnics》
《International Journal for Numerical and Analytical Methods in Geomechanics》
《Canadian Geotechnical Journal》
《Engineering Structures》
《Tunnelling and Underground Space Technology》
《Bulletin of Engineering Geology and the Environment》
《Natural Hazards》
《ASCE Journal of Engineering Mechanics》
《Soil Dynamics and Earthquake Engineering》
《Marine Georesources & Geotechnology》
《Journal of Earthquake Engineering》
《Mathematical Problems in Engineering》
《Journal of GeoEngineering》
《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》
《International Journal of Geotechnical Engineering》